Metalosate Crop-up Organic

Tips for Working with Metalosate® Soluble Powders

Initially, Metalosate Soluble Powders will required special mixing attention. Like any powder, Metalosate Soluble Powders have a tendency to clump when introduced to liquids. Because of this, we have taken every step possible within the requirements of National Organic Program to make these materials as user-friendly as possible.

Care should be taken to ensure that the materials are fully mixed and dispersed throughout the spray tank. One way to assure proper dispersion is to place the required amount of powder into a bucket of water. After fully mixing, the product can be added to the spray tank. You can then mix the next spray tank worth of powder in a bucket and let it hydrate while spraying the first load. This makes the mixing much easier.

Additional methods of dispersal include:

Use an inductor system.
Wash the product through the anti-splash screen on the top of the spray tank.

We hope this helps make your job a little easier and your day more productive.

If you should need anything further don’t hesitate to contact your local rep.

Guaranteed Analysis (w/w):

Total Nitrogen (N) 4.0% (4.0% water soluble organic nitrogen)
Magnesium (Mg) 1.50% (Complexed)
Copper (Cu) .75% (Complexed)
Iron (Fe) .75% (Complexed)
Manganese (Mn) 7.50% (Complexed)
Zinc (Zn) 3.75% (Complexed)

Standard US Container Size*

4.4 lbs (2 kg)

GENERAL INFORMATION:

Amino acid chelated Metalosate^® Crop-Up^® soluble powder is designed for foliar application on plants to prevent or correct nutrient deficiencies that may limit crop growth and yields. It is water soluble and nontoxic to plants when applied as directed. For best results, apply Metalosate^® Crop-Up^® soluble powder according to recommendations based on plant tissue or soil analysis.

DIRECTIONS:

Apply by a spray method and in an adequate amount of water that will provide complete coverage of the plants. Use of a non-ionic wetting agent may improve spray coverage of certain hard to wet plants.

Metalosate^® Crop-Up^® soluble powder can be included in a regular spray program on crops. Consult with an Albion representative on compatibility with other spray materials.

The rate of application will depend on the crop, stage of growth, and severity of deficiency. The maximum recommended rates are for mature, full-sized plants. Reduce the rates proportionately when spraying smaller plants.

Metalosate^®Crop-Up^® soluble powder may be used on legumes, grain crops, root crops, cucurbits, cole crops, leafy vegetables, woody and herbaceous ornamentals, deciduous fruits, vine crops, tropical and subtropical fruits, and many other crops.

RECOMMENDATIONS:

Field Crops and Vegetables: Apply 7 to 14 ounces (200 to 400 grams) per acre during periods of rapid growth or nutritional stress. The application may be repeated 2 or more times through the growing season.

Tree Crops: Make an application of 14 to 28 ounces (400 to 800 grams) per acre after the beginning of active growth. The application may be repeated at 2 to 4 week intervals through the growing season

Grapes and Berries: Make an application of 7 to 14 ounces (200 to 400 grams) per acre after active growth begins. The application may be repeated at intervals of one week or more through the vegetative growth period.